Reisser Countersunk Cutter Wood Screws - 6 x 130mm (100 Box) (8221S220601302)
These high quality Reisser Cutter Wood Screws are uniquely designed to effectively secure your hardwood, softwood or man-made board workpiece without damaging any of the visible surfaces or splitting the wood.
- Self Countersinking - pronounced ribs & tucks on the underside of the head allows these screws to create their own counterbore to sit flush with the work surface.
- Reinforced Collar - the neck of these screws has been enlarged and bolstered with additional material to prevent the screw from snapping and allow for an extra-deep pozi slot which reduces the risk of a 'cam-out' when inserting or removing the screw.
- Lubricated, Wide & Deep Thread - the sharp edged thread of these screws reduces the driving resistance by up to 40% which makes it much easier to drive these screws into all types of wood.
- Yellow Tropicalized Finish - the rust resistant coating applied to these screws has been adapted to offer protection from both moisture and fungi resulting in a longer lasting screw than the standard Bright Zinc Plated Screw (BZP Screw).
- Two Patented Split Prevention Slots - to ensure that driving screws near the edge of your workpiece won't split your wood and potentially ruin your hard-work these screws use two cleverly placed slots to prevent the fibres of the wood from separating.
- 25° Needle Point - the tip of these screws is sharp enough to drive into all types of wood without a pilot hole.
- Partially Threaded