Timloc - Eaves Ventilation
USE
- For pitched roof eaves ventilation
- On standard pitched roofs with rafter spacings between 400mm and 600mm
PRODUCTS IN THE PACK
- 1m over fascia ventilator - Product OF1 or OF2 six lengths are included in the pack
- Roll Form Eaves Ventilator - Product 1121. 1 x 6m roll is included in the pack
- Felt Support Panel - Product 1128. 10 x 600m lengths are included in the pack
FEATURES AND BENEFITS
- Efficient and easy to fit
- Durable and totally resistant to decay
- Complete eaves ventilation system in a single pack
ROLL FORM EAVES VENTS
Unroll the ventilator along the rafters along the full length of the eaves. Position centrally above the wall plate. This is the narrowest part of the roof where the roof insulation is most likely to constrict the airflow. Push the corrugation down over the top of the rafters and secure using clout nails or staples.
OVER FASCIA VENTS
Fix ventilators to the top edge of the fascia board using screws or nails through the fixing holes provided. Ventilation must be provided for the full length of the eaves and along both sides of the building to create a cross flow ventilation action.
FELT SUPPORT PANELS
Fit directly on top of the over fascia vent. Secure with clout nails driven into the top of the fascia board through the slots in the over fascia vent. Ensure each panel is allowed to overlap the next. Allow the rear of the flat panel to lay back on the rafters.
Delivery rates are automatically calculated at the checkout and depend on destination, size, content and the value of the order.
Ireland Shipping: Estimated €13 exVAT
2 to 3 working days delivery time
Europe Shipping: Estimated €16 exVAT
4 to 5 working days delivery time
Worldwide Shipping: Calculated
5 to 7 working days delivery time depends on destination, size, content and the value of the order.