Timloc Inter-Loc Horizontal Stopend LH
Best use for abutment of a flat roof with a cavity wall. At the abutment of a lean-to or mono pitch roof with a cavity wall. Over concrete ring beams. Over airbricks, cavity liners, ducts, meter boxes, etc. On external walls - not exceeding 102.5mm in thickness - built from standard brickwork, blockwork or stone. Clear cavity widths of between 50mm-125mm. Fits all clear cavity sizes up to 125mm.
- Suitable for brick, block and stone wall construction.
- 150mm highback upstand exceeds minimum requirements of NHBC.
- Angled section between cavity. Interlocking mechanism for jointing tray lengths to eliminate tray jointing.
- Built to brick bonding lengths for ease of use
- Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf
- Built independent to the inner leaf will enable inner and outer leafs to be built independently if required
- Available in two lengths: 4 brick for general use and 2 brick for reducing waste when making up a run of cavity tray to the required length
- The system is available upon request with pre-applied polystyrene strips. Polystyrene is much easier to rake out than mortar and offers a visual locator of the cavity tray so aiding the installation of post fitted lead work.
- Horizontal Inter-Loc Cavity Tray. The main cavity tray component. Sections join together by means of a lapped interlocking join, to form the main cavity tray run. Water is gathered by the cavity tray and is discharged from the wall through a series of weep holes - one weep hole per inter-loc tray is required.
- Corner Units. Allows the integrity of the main cavity tray run to be maintained when it is necessary to turn a corner on a building. Available in either external or internal format.
- Stopends. Fitted at the start and finish of the cavity tray run to seal off the open ends and prevent water running back into the cavity.
- Let Trade Counter Online take the load with our free Cavity tray specification and scheduling service (contact us for more information)
Delivery rates are automatically calculated at the checkout and depend on destination, size, content and the value of the order.
Ireland Shipping: Estimated €13 exVAT
2 to 3 working days delivery time
Europe Shipping: Estimated €16 exVAT
4 to 5 working days delivery time
Worldwide Shipping: Calculated
5 to 7 working days delivery time depends on destination, size, content and the value of the order.